Appalachian made
Panels, posts, caps, screws, gates and gate hardware — everything you need, cut and welded from American aluminum in our own shop and finished in satin black. Most kit sellers include one walk gate. We include up to three.
Build your kit
No forms to fill in just to see a number. Pick what you need and the price updates as you go. The more fence you buy, the less it costs per foot — the three gates spread across a longer run.
Measured in linear feet. Panels are 6 ft each.
Three rails is stiffer and the usual choice for dogs, pools and slopes. Two rails is lighter and costs less.
5 ft is the usual minimum for pool-code enclosures — check your local code.
Included in the kit price — not an add-on.
Gate height always matches your fence height. Width is the opening each gate fills.
Width — all gates
Top — all gates
Hardware — all gates
Pool-code hardware only where you need it — put it on the pool gate and keep standard latches on the rest.
Prices, stated plainly
Every price below includes the panels, the posts, the caps, the screws and three gates with hardware fitted. Nothing is held back to be added at checkout. Freight is quoted separately by delivery ZIP, because a pallet to Ohio and a pallet to Montana are not the same shipment.
| Kit | Panels | Posts | Gates | Price as shown | Per foot | Range |
|---|---|---|---|---|---|---|
| 120 ft | 20 | 27 | 3 | $3,650 | $30.42 | $2,258–$4,455 |
| 150 ft | 25 | 32 | 3 | $4,240 | $28.27 | $2,798–$5,119 |
| 300 ft | 50 | 57 | 3 | $7,190 | $23.97 | $5,494–$8,438 |
“Price as shown” is a 4 ft 3-rail kit with three 4×4 ft flat-top gates and standard hardware. The range covers every combination the builder above can produce — from a 4 ft 2-rail kit with no gates to a 5 ft 3-rail kit with three 6 ft arched gates on pool-code hardware.
Specification
| Item | Specification |
|---|---|
| Panel width | 6 ft |
| Panel height | 4 ft or 5 ft |
| Rails | 2-rail or 3-rail |
| Material | Aluminum, American mill stock |
| Finish | AAMA 2604 architectural powder coat, satin black |
| Gate widths | 3, 4, 5 or 6 ft |
| Gate tops | Flat or arched |
| Gate corners | Welded, not bolted |
| Gate hardware | Standard (self-closing hinges + gravity latch) or pool-code (self-closing hinges + Magna Latch) |
| Gate posts | Heavy wall, two per gate |
| Post caps | Flat, one per post |
| Warranty | Lifetime structural warranty on gates |
| Shipping | One pallet, LTL freight, 43 states |
What you're actually buying
Raw stock from American mills, cut to length in our own Appalachian shop — not imported pre-formed and rebadged.
Gate corners are welded into one piece. Bolted corners work loose after a few thousand swings; welded ones don't.
AAMA 2604 architectural-grade powder coat — the class used on commercial storefronts, not a dip finish.
Straight comparison
A 150 ft kit is the most common size sold. Here's ours against a typical all-inclusive kit at the same length.
| 150 ft kit | Typical kit seller | American Fence Kits |
|---|---|---|
| Fence panels | 25 | 25 |
| Posts | 29 | 32 |
| Gates included | 1 walk gate | up to 3 |
| Gate hardware fitted | Sometimes | Always |
| Welded gate corners | Usually bolted | Welded |
| Made by the seller | Often distributed | Fabricated in-house |
Comparison based on published specifications for a comparable 150 ft all-inclusive aluminum kit, September 2026. Post counts differ because we supply dedicated heavy-wall posts for every gate.
Questions we actually get
A 150 ft kit is $4,240 as shown — 25 welded panels, 32 posts with caps, screws, and three 4 ft gates with hardware fitted. That is about $28 per foot. Depending on rail count, panel height, gate widths and hardware, a 150 ft kit ranges from $2,798 to $5,119. Freight is quoted separately by delivery ZIP.
Fence panels, line posts, heavy-wall gate posts, post caps, post screws, and up to three gates with the gate hardware already fitted. The whole fence on one pallet — there is no separate hardware order to place.
Up to three, included in the kit price. Most kit sellers include one walk gate and charge for the rest. Because we fabricate the gates ourselves rather than buying them in, we can include three without changing the price of the kit.
120 ft, 150 ft and 300 ft. Panels are 6 ft wide, in 4 ft or 5 ft heights, 2-rail or 3-rail. The longer the kit, the lower the cost per foot, because the three included gates spread across a longer run.
Welded. Gate corners are welded into a single piece rather than bolted with corner brackets. Bolted corners work loose after a few thousand swings and start to sag; welded ones do not. That is why the gates carry a lifetime structural warranty.
Yes. Raw aluminum comes from American mills and is cut, welded and powder coated in our own Appalachian shop — not imported pre-formed and rebadged. The finish is AAMA 2604 architectural-grade powder coat in satin black.
Yes. Choose the pool-code hardware option and gates ship with self-closing hinges and a Magna Latch rather than standard hinges and a gravity latch. Check your local barrier code for the required height before ordering, since minimums vary.
On one pallet by LTL freight, to 43 states. Freight is quoted per delivery ZIP rather than built into the kit price, so nobody in Tennessee subsidises a delivery to Montana.
Last step
Kit pricing is set. Freight depends on where it's going, so we price it properly rather than padding it into the number. Send this over and we'll come back with delivered cost — usually same business day.